Trench mesh laps; Where trench maps are joined end to end, they need to be overlapped by at least 500 mm. Where they overlap at T or L intersections the overlap should be the width of the trench mesh
Reinforcing bar lap; Reinforcing bar laps need to be overlapped by at least 500 mm
Square mesh lap; Square mesh lap has to be overlapped by at least 225 mm
Thank you so much for the sharing. All contents were expressed in a clear n simplified manner n it was meaningful too. You are a marvelous writer. Good work! Aluminum Nitride CNC Machining.
ReplyDeleteThanks for publishing such best knowledge with us. You are doing such a great job. This info is very helpful for everyone. Keep it up. Wind Tunnel Polishing Services.
ReplyDeleteYour ideas are very useful. Actually one of my friends is planning to work in this field, so I’ll definitely recommend your post to him. Many thanks to you. Custom CNC Micromachining by Valley Design.
ReplyDeleteYour blog held my interest right to the very end, which is not always an easy thing to do!! Glass Lapping and Polishing Services for All Materials.
ReplyDeleteYou are writing is always fabulous. This is third time I’ve read your blog and I find the information very useful. Optical Polishing Services for all Materials.
ReplyDelete